Materials, Fuels & Mechanical, NABL-accredited lab
Mechanical Performance, Durability & Safety Testing
7 to 14 working days
Standard turnaround from sample receipt
NABL TC-5843
Accredited to ISO/IEC 17025:2017
Universal testing machines to 100 kN
Primary technique on this service
14,000 sq. ft.
Integrated laboratory in Jaipur
This service loads, ages and stresses a product until its limits are measurable, covering tensile, compression, flexural and fatigue strength, corrosion and weathering exposure, transit simulation and basic product safety checks. Results are reported against the standard or the drawing tolerance you supply.
Qualifying a component or assembly for a tender or contract
Proving durability, corrosion or UV claims on a product
Investigating a field failure or a warranty claim
Validating packaging before a long or rough transit route
What we test on this service
Panels are built from the list below. Tell us the market and the specification and we select the parameters it calls for rather than selling you the whole sheet.
Tensile, compression, flexural and shear strength
Fatigue and cyclic load durability
Accelerated ageing, UV and humidity exposure
Salt spray corrosion resistance
Drop, vibration and transit performance
Sharp edge, stability and product safety checks
Method
How the analysis runs
Instrumentation and controls
Every batch runs with the controls its method requires, on calibrated equipment, and a second analyst reviews the data before the report is released.
Standards and methods
Results are reported against the method below, or against your buyer's specification where you send one with the sample.
Ask for the full NABL scope document if you need to confirm accredited coverage before sending the sample.
Not sure which parameters your buyer wants?
Send us the specification. We will tell you what to test and what it costs, at no charge.
The approvals this work is issued under
Mechanical scopes are accredited under NABL TC-5843 and used for BIS conformity, tender qualification and third-party inspection release.
Before you send it
Five specimens per test direction, or three finished units for product-level testing, with drawings and the specification you want us to report against.
7 to 14 working days. Accelerated ageing and salt spray run for the exposure hours the standard specifies.
Engineering and component manufacturers
Furniture and consumer product brands
Infrastructure and utility contractors
Procurement teams running tender qualification
Send a sample
Fill in the Test Request Form, pack the sample as described above and courier it to the Jaipur laboratory. Call us first if the sample is perishable.
Get the TRFRelated queries
Questions we get asked
Can you test to a client drawing rather than a standard?
Yes. Send the drawing and the acceptance criteria. We report measured values against your limits and state the method used.
How many specimens do you need?
Five per test direction for material properties, three finished units for product-level testing. More if the standard specifies it.
Can you run a test to a customer drawing instead of a standard?
Yes. Send the drawing and the acceptance criteria, and we report measured values against your limits with the method stated.
How long is a salt spray or UV exposure test?
As long as the standard specifies, commonly 240, 480 or 1000 hours. That clock cannot be shortened.
Request a quote
Tell us what you need tested
Send the product, the market it ships to and the standard you are being held to. Our technical team replies with the parameter list, the sample quantity we need and a firm turnaround. Quotes usually go out the same working day.
+91-9950229764 / +91-9634063932
Sample receipt: Monday to Saturday, 9:30 am to 6:00 pm