Water & Wastewater, NABL-accredited lab
Water & Wastewater
5 working days
Standard turnaround from sample receipt
NABL TC-5843
Accredited to ISO/IEC 17025:2017
ICP-MS and ICP-OES
Primary technique on this service
14,000 sq. ft.
Integrated laboratory in Jaipur
This service measures the chemistry and microbiology of a water sample against the standard that applies to its use: IS 10500 for drinking water, IS 14543 for packaged water, and consent conditions for effluent. Results state each parameter next to its permitted limit, so conformity is visible at a glance.
Applying for or renewing a BIS licence for packaged drinking water
Filing periodic effluent or groundwater results with the pollution board
Commissioning a new borewell, RO plant or treatment unit
Investigating taste, odour, colour or a health complaint
What we test on this service
Panels are built from the list below. Tell us the market and the specification and we select the parameters it calls for rather than selling you the whole sheet.
Full IS 10500 drinking water panel
Packaged drinking water and mineral water under IS 14543 and IS 13428
BOD, COD, TSS, oil and grease, ammoniacal nitrogen
Heavy metals and trace elements
Total and faecal coliforms, E. coli, Pseudomonas
Pesticide residues and radioactive residues
Method
How the analysis runs
Instrumentation and controls
Every batch runs with the controls its method requires, on calibrated equipment, and a second analyst reviews the data before the report is released.
Standards and methods
Results are reported against the method below, or against your buyer's specification where you send one with the sample.
Ask for the full NABL scope document if you need to confirm accredited coverage before sending the sample.
Not sure which parameters your buyer wants?
Send us the specification. We will tell you what to test and what it costs, at no charge.
The approvals this work is issued under
Water scopes sit under NABL TC-5843 and our Central Pollution Control Board approval, and are accepted for BIS licensing of packaged drinking water.
Before you send it
2 litres for a chemical panel in a clean plastic container plus 500 ml in a sterile glass bottle for microbiology. Microbiology samples must reach us within 24 hours, chilled.
5 working days for a standard IS 10500 panel, 7 working days with pesticides. BOD adds 3 days by method.
Packaged water plants applying for BIS licence
Industrial units reporting to the pollution board
Hotels, hospitals and townships
Municipal bodies and water utilities
Send a sample
Fill in the Test Request Form, pack the sample as described above and courier it to the Jaipur laboratory. Call us first if the sample is perishable.
Get the TRFRelated queries
Questions we get asked
Which panel do I need for a BIS packaged water licence?
The full IS 14543 panel including radioactivity and pesticide residues. We issue it in the format BIS asks for.
Can you collect the sample?
Yes. Our sampling team draws and seals samples on site so the chain of custody holds up.
How soon must the sample reach you?
Microbiology within 24 hours, chilled. Chemical parameters within 48 to 72 hours depending on the analyte. Send it the same day you draw it.
Which bottle should I use?
Sterile glass for microbiology, clean plastic for general chemistry, and amber glass filled to the brim for organics. We supply bottles on request.
How often does a packaged water plant need to test?
BIS requires daily in-house checks and periodic third-party testing. We usually see plants send a full IS 14543 panel monthly.
Request a quote
Tell us what you need tested
Send the product, the market it ships to and the standard you are being held to. Our technical team replies with the parameter list, the sample quantity we need and a firm turnaround. Quotes usually go out the same working day.
+91-9950229764 / +91-9634063932
Sample receipt: Monday to Saturday, 9:30 am to 6:00 pm